Panel glide blinds offer a sleek, sophisticated take on traditional window fashions. Their modern design makes them a perfect choice for any home.
Dust and grime can build up over time on your window coverings, causing them to look dull and dirty. Thankfully, cleaning your blinds is easy.
Dusting
Dusting is an integral part of keeping your panel glide blinds looking good. It can remove any unwanted dust and dirt from your window treatments that are otherwise difficult or impossible to reach using other cleaning methods.
You can dust your panel glide blinds with a feather duster or brush attachment on a vacuum cleaner. It will help keep them looking like new for years to come.
During the cleaning process, you should also pay close attention to the edges of your panel glide blinds, as these are more likely to get dirty and need extra care when it comes to cleaning. It would help to use a soft cloth when you dust these areas to avoid damaging the material.
Another tip is to avoid using harsh chemicals when you clean your panel glide blinds. It can cause a lot of damage, so it’s best to use mild cleaning products when dusting these materials.
Vacuuming
When cleaning panel glide blinds, it is important to vacuum them regularly to remove any accumulated dust and debris over time. It will keep your blinds looking as good as new and help prevent mould build-up on the slats and panels.
The best way to vacuum your blinds is with a vacuum cleaner, which comes with a brush attachment that you can use to clean them. Just be sure to give each slat a thorough once over, front and back, and remember to do the bottom slat as well!
Once you have vacuumed your blinds, wipe them down with a damp cloth and a little mild soap to help them look their best. It will also help remove any stains or dirt that may have built up.
You can even use a dust buster to help remove any stubborn dust and grime that might be hiding deep in the crevices. It is an excellent option if you have hard-to-reach areas or wooden blinds.
Spot Cleaning
As a long-term investment, window blinds from Blinds on Demand must be cleaned and maintained properly to get the most out of them.
Keeping your panel glide blinds clean is easier than you might think. First, it’s essential to understand the care instructions on your blinds before you start cleaning them. Some blinds, including wood and faux wood, are sensitive to moisture and should not be submerged in water.
If your panel glide blinds are made from wood, thoroughly vacuum them regularly so they don’t accumulate dust. Using a brush attachment on your vacuum is also a good idea to help you remove any debris.
Another type of window blind that needs a little more attention is natural woven wood shades, which can be tricky to keep clean because they have tight weaves that trap dust and dirt. To keep them fresh, lightly dust them with a feather duster or lint-free cloth.
For stains and smudges, a mild solution of lukewarm water may spot-clean the material. Lastly, it’s important to remember that some blinds are complicated to remove from the window or door frames. You should call a professional to help you if this is the case.
Ultrasonic Cleaning
Ultrasonic cleaning is a fast and effective way to clean your panel glide blinds and restore them to their original appearance. It’s also safe and requires no chemicals.
An ultrasonic cleaner generates high-frequency sound waves that produce millions of microscopic bubbles. As these bubbles implode, they create vibrations that blast away dust, grime, bacteria, allergens and nicotine from your blinds’ surface, cords, pull systems, weights, chains, rails and slats.
These vibrations can penetrate cracks, recessed areas and blind holes for the ultimate precision cleaning process. It’s even suitable for complex treatments like aluminium, vinyl, faux and wood.
The sound waves travel within a solution, creating peaks and troughs that cause cavitation bubbles on the cleaned parts. These bubbles then collapse, releasing heat and pressure that removes contaminants without damaging the cleaned object.
A typical ultrasonic cleaner can clean objects in minutes, but the duration depends on the item being cleaned. Delicate items or complex industrial parts may take longer to clean.
When you use an ultrasonic cleaner, choosing a cleaning solution compatible with the machine is essential. It is because different solutions will have different characteristics that will impact how they clean. For instance, some solutions can be used with water, but others require a solution that is not too alkaline or acidic.
If you need help deciding which solution to use, ask an expert for advice. They’ll be able to guide you through the process and recommend the best solution for your window coverings.
Many types of ultrasonic cleaning machines are on the market, including heavy-duty industrial cleaners and small toy-like systems. Heavy-duty industrial cleaners feature larger compound transducers and hard-bitten generators that generate a higher wattage per transducer. They’re often welded stainless steel and come with separate tanks.