Whether you plan to sell your home soon or want to upgrade its appearance, making plumbing improvements is an excellent way to boost its value.
While many homeowners don’t consider their plumbing systems when looking for ways to improve the livability and value of their homes, it’s one of the easiest and most cost-effective upgrades you can make.
Replace Old Pipes
Many older homes are fitted with lead pipes that pose a health hazard if they leak. They’re particularly dangerous for children, who can develop mental development problems due to lead poisoning.
Lead pipes can also be a potential fire hazard and are unsuitable for modern homes, so it’s best to get them replaced as soon as possible. If you’re unsure whether or not your house has lead pipes, ask a plumber to check it out.
Galvanized steel pipes are also a big issue for old houses and have a much shorter lifespan than copper or plastic pipes. They corrode, causing leaks and discolouration of your water supply.
The best option for replacing these pipes is to replace them with a new pipe between your corporation stop or water meter and your house. This way, you’ll avoid the need to remove your wall-mounted water meter and plumbing lines inside your home. Check this link to get more information and advice on this.
Install New Fixtures
Whether you’re looking to move, refinance, or simply want to increase the value of your home, one of the best ways to do so is by making improvements to your plumbing. The simplest and quickest way to do so is by replacing old fixtures.
Many households rely on plumbing fixtures like toilets, showers, faucets, sinks, and bathtubs to help them with their daily routines. However, these products eventually wear down because of constant use.
When it comes time to replace your fixtures, you may want to consider upgrading them with newer models designed for comfort and convenience. Modern fixtures can also be more energy-efficient, lowering your utility bills over time.
Another great reason to install new fixtures is that they can dramatically improve the aesthetic of your bathroom or kitchen. Various styles and colours are available, so you can easily coordinate them with the rest of your decor to give your room an updated look.
In addition, many new plumbing fixtures are water-conscious, which can help you save money on your monthly water bill. For example, low-flush toilets and shower heads save up to six gallons of water per flush, while high-efficiency models reduce water consumption even further.
Replacing your old pipes can greatly affect your home’s comfort, safety, and efficiency. But it can be a daunting project to take on alone, so consider hiring a plumber to do the work for you.
Reroute Pipes
Your plumbing system is the heart of your home and keeps water-dependent rooms like the kitchen and bathroom up and running. If a pipe is blocked or leaks, it can disrupt the water flow in these spaces and cause costly damage.
The best way to prevent leaks from forming is to repair them early on before they cause any serious damage. It can be done by rerouting the pipes.
Rerouting a plumbing line is a process that involves cutting into the existing pipe and repositioning it in a new location. It’s a great option when the pipe is located in a basement or crawlspace and can be difficult to access.
It’s also a good idea to reroute pipes when they’re located in the slab of your home. It can avoid digging up your foundation and needing expensive foundational work.
To reroute plumbing, it’s important to know the right techniques and materials to use. It would help if you also worked with a plumber who understands the intricacies of rerouting.
Fortunately, rerouting plumbing is easier than it seems. It can be accomplished using PEX pipe, a flexible option that’s more cost-effective than copper pipe.
Another good option is to reroute plumbing through a wall chase, which is a faux wall that hides your pipes. This method is less invasive and can be used in many types of houses, including multi-storey ones.
Whether you’re remodelling your bathroom or replacing a damaged water line, rerouting your plumbing can effectively fix the problem quickly and cost-effectively. However, the process is best left to professionals to ensure you get a quality job.
Install Water Heaters
New water heaters are more energy efficient, quieter and easier to maintain than their older counterparts. Some of them are even tankless, which heats hot water on demand.
The installation process varies by type of water heater, but generally, it includes disconnecting your old one, removing the gas line and electric wires, and installing the new unit. It can take up to three hours for a professional plumber to complete.
As you work, remember to follow the directions in the water heater’s installation manual and not cut your fingers while handling the gas line or the electrical wires. Skipping these steps can void the equipment’s warranty and reduce its efficiency.
